• A Jenx Product Adviser or Jenx Service Technician will visit a single
site and inspect up to 4 products in the same department.

• A Jenx Product Adviser or Jenx Service Technician will visit a single
site and inspect up to 5-8 items.

The product/s must be cleaned in line with current government guidelines before inspection.

The inspection involves a full inspection of the whole product to check all structural, moving and other parts. A comprehensive Inspection Sheet is filled in and a copy left with the competent person. The product Log Sheet in the IFU is also filled in by the Jenx representative carrying out the inspection.

The inspection does not include repair or replacement costs. The repair/replacement of any defects/faults will be quoted for. An Order will need to be raised for any necessary work. On-site repair may be possible once the order has been received. The product must be available at the initial inspection location for repair.

A suitably qualified/competent agent of the Owner must attend the inspection and repair.

OSIS and Set Up

Jenx personnel will not be able to set up an old product for a customer without an order for an inspection of the product being received first.

The price will include up to two product inspections and set ups, so long as the products are found to be fit to use.

If the products are not fit to use a further 2 more pieces of Jenx equipment can be inspected as long as they are on site.

There will be charge to fit any required parts. This could be to fit parts on up to four products and set ups at that address.

If the return visits are on different days for whatever reason then a charge will apply per visit